Exactly the right hardware for your property
Technical Specifications
- Environment Data
Operating Temperature: -35° - 75°C
Storage Temperature: -20° - 50°C- Power Supply
230 Volt / AC Power
- NFC Reader
13.56MHz Frequency
Supported Technologies ISO 14443-A, ISO14443-B, FeliCa, MIFARE 1K/4K/DESfire/Ultralight, SNEP, NDEF Reading Range up to 5 cm- Status Indicator
RGB Leds. Up to 65535 colors
- Dimensions
128.3mm x 82.2mm (wallbox) / 44.7mm x 24.6mm (H x L x W)
- Carrier Frequency
868MHz for internal communication
13.65MHz für NFC
2.4GHz für BLE- Bluetooth LE
Range up to 10m for data transfer
- System Requirements
Compatible iOS or Android device with PAYUCA Apps
Technical Specifications
- Connection
Operating -30°C ~ 60°C (-22°F ~ 140°F)
- Power Input
12V DC
- Dimensions
118 x 118 x 294 mm
- Weight
1,254 g
- Field of view (camera lense)
30° ~ 100° (Horizontal), 23° ~ 72° (Vertical), 38° ~ 135° (Diagonal)
- Safety Certifications
CE, LVD, FCC Class A, VCCI, C-Tick, UL, EN50121-4
Technical Specifications
- Dimensions
Wallbox: H: 256 x W: 193 x D: 106mm
Wall mounting (mm): c/c H: 160 x W: 125mm
Weight: 1.5 kg
- Operating temperature
-30 °C to +50 °C
- Charging
1.4–22 kW
6 A 1 phase – 32 A 3 phase (automatically adjusted in relation to available capacity)
Up to 7.36 kW at 32 A 1 phase
Up to 22 kW at 32A 3 phase (TN grid)
- Voltage
3 x 400 V AC/ 230 V AC (±10 %)
Mains frequency: 50/60 Hz
- Connection point
Type-2 socket (IEC 62196-2)
- Load balancing
Up to 101 (Easee Charge) Charging Robots on the same circuit;
Load and phase balancing works offline
- Connectivity
Built-in eSIM (LTE Cat M1/ 2G /GPRS)
WiFi 2.4 GHz b/g/n connection
RFID/NFC reader
- Sensors and indicators
Light strip showing the status of the charger
Touch button for manual adjustment
Temperature sensors in all main contacts
- Energy meter
Yes, built-in (±2 %)
- Degree of protection
IP54 (the backplate is IP22 without cover)
Technical Specifications
- Dimensions
H: 256 x W: 193 x D: 78mm
Wall mounting (mm): c/c H: 160 x W: 125mm
- Wire terminals
Wire cross-section: up to 16 mm² (single cable)/ up to 10 mm² (parallel connection)
Cable diameter: 8–22 mm
Terminal torque: 5 Nm
Cable strip length: 12 mm
- Installation
Installation network: TN, IT or TT
Installation circuit breaker: Max 40 A (Easee Home) or max 80 A (Easee Charge) overload protection.
The short-circuit current at the charging point (IkMax) must not exceed 10 kA.
If required by the installation, type-A earth fault protection can be used for the circuit.
- Protection
IP44
Combine the right solutions for your needs
Frequently asked questions
Let us help answer the most common questions you might have.
-
If only a reader is in use on-site, an internet connection is not necessary. As the primary connectivity hub, it contains a sim card. If additionally, an LPR camera is installed, a direct internet connection is required.
-
The warranty is three years on both reader and LPR camera.